Furnace Installation & Replacement in San Mateo, CA
Furnace replacement for older San Mateo homes and new furnace installation for additions and new builds, with permits, city inspection and a written warranty included.
Furnace Installation for San Mateo Homes
In San Mateo the furnace does most of the year’s work. Winters are damp and cool, summers are mild, and some homes have little or no air conditioning. That makes the furnace the system you rely on, and a poor installation shows up on cold mornings.
Older San Mateo homes bring their own challenges. Furnaces are often tucked into a closet, garage, or crawl space, and the old venting may not suit a new unit. We check access, clearances, and venting before we choose equipment, so the new furnace fits the space it has to live in.
Furnace Options We Install
In a mild climate like San Mateo’s, we also tell you when a heat pump alone would serve you better.
What We Check on Every Furnace Installation
Load
We size the furnace to your home as it is today, not to the old nameplate.
Venting
We confirm the exhaust path is safe and meets code.
Gas connection
We check the line, the shutoff and every connection.
Ductwork
We look at condition, size and airflow before the new unit goes in.
Thermostat
We make sure it is compatible and set up correctly.
Permit and inspection
We pull the permit, handle the city inspection and test the system before we leave.
Rebates and Incentives for San Mateo Homeowners
Incentives may be available depending on the system you choose. San Mateo homes are served by PG&E and WestLight Energy, and local options can sometimes be combined with other programs. Details change and programs can run out, so your project manager confirms what applies by phone.
From First Call to Final Inspection
Here’s exactly what happens when you work with us, from the first conversation to the city sign-off.
Step 1
Free Estimate and System Assessment
We visit your home at no charge. During the visit, we assess your existing heating system, measure the space, evaluate your ductwork condition, and check your electrical panel. We perform a load calculation to determine the correct system size for your home’s actual heating demand – not a guess based on the previous unit’s BTU rating.
At the end of the visit, you receive a written scope and price. No verbal estimates, no ranges – a specific number for the specific job.
Step 2
System Selection
We recommend the right furnace based on your load calculation, existing infrastructure, and your goals. We’ll walk you through your options – system type, efficiency rating, and brand – and explain the trade-offs clearly. We work with Goodman, Carrier, Lennox, Trane, Daikin, and Rheem.
If you are weighing gas against electric, we give you a direct comparison of installed cost, operating cost, and incentive eligibility so you can make an informed choice.
Step 3
Permits
We pull all required permits through the city or county building department before work begins. In San Mateo and across San Mateo County, furnace installations require a building permit and a final city inspection. We handle the permit application, coordinate with the inspector, and schedule the inspection as part of our standard process.
An unpermitted installation is not covered under manufacturer warranty and creates disclosure obligations when you sell your home.
Step 4
Installation
Most furnace installations are completed in one day. Projects that include ductwork modification, electrical panel work, or gas line changes may take two days – we give you a specific timeline at the estimate, before any commitment.
Our in-house team handles HVAC and electrical under one contract. If an electrical upgrade is needed as part of your furnace installation, it’s included in the same scope – not subcontracted out.
Step 5
City Inspection and Commissioning
We schedule city inspection and pass it before the job is closed out. Our inspection pass rate across San Jose and the Peninsula is 100% – the result of pulling proper permits, sizing equipment correctly, and not cutting corners on connections.
After inspection, we commission the system: verify gas pressure (for gas units), check airflow across all registers, calibrate the thermostat, and confirm full system operation. We walk you through filter replacement schedule and basic maintenance before we leave.
Why San Mateo Homeowners Choose Ozone Service for Furnace Installation
HVAC and Electrical Under One Roof
Furnace installation almost always involves electrical work. At minimum, a furnace needs a dedicated circuit, a disconnect box, and proper grounding. Gas furnaces require a 120V circuit for controls and the blower motor. Electric furnaces draw significantly more - often 60–100 amps on a dedicated breaker. Dual-fuel systems involve both. When two separate contractors handle HVAC and electrical, accountability disappears the moment something goes wrong. Each trade points to the other. We carry both HVAC and electrical licenses. One team handles the full scope - gas, electrical, and ductwork - under one contract and one warranty. If something fails, there's no question about who fixes it.
Correct Sizing - Not a Like-for-Like Swap
Most furnace replacements go like this: the old unit comes out, the new one goes in the same spot, same BTU rating, and job done. The problem is that the original furnace may have been oversized from the beginning - common in Bay Area homes where contractors routinely overspecified equipment. Or your home has had insulation added, windows replaced, or an addition built since the original install. We perform a full load calculation on every installation. If the correct size is different from what you had before, we'll explain exactly why and show you the math.
100% City Inspection Pass Rate
Every installation we complete passes city inspection on the first attempt. That's not a marketing claim - it's a trackable outcome. The reasons: we pull proper permits before starting, we size equipment correctly, and we don't skip refrigerant charge verification, gas pressure testing, or electrical protection checks. Inspectors reject installations that take shortcuts. We don't take shortcuts.
We Handle the Incentive Paperwork
Rebates require that the installation meet specific efficiency standards, use qualifying equipment, and be documented correctly. Most HVAC contractors don't know the requirements well enough to ensure the installation qualifies, and they leave the paperwork to the homeowner. We’ve secured more than $500,000 in rebates for Bay Area homeowners over the last 6 months because we built compliance into the installation from day one. The documentation gets handled. You get the credit.
Written Warranty on Every Job
HVAC installation labor is covered for 3 years and can extend up to 12 years with annual maintenance. Electrical work carries a 1-year labor warranty, and equipment is covered by its manufacturer. One team, one contract, everything in writing.
Authorized Dealer & Installer
Recently Completed in the Bay Area
Serving San Mateo and Nearby Cities
We work throughout San Mateo with in-house, background-checked technicians. We also install furnaces in Belmont, Foster City, Burlingame, Millbrae, San Carlos, and Redwood City.
What Our Customers Say
Frequently Asked Questions
Can I add air conditioning later if my San Mateo home only has a furnace?
Yes, in many cases. A furnace and AC share ducts and a blower, so we check them at installation to make sure cooling can be added later.
Can you install a furnace in a tight closet or crawl space?
Yes, we can. We choose equipment that fits the space and meets clearance requirements, so the installation is safe and serviceable.
Can I switch from a gas furnace to an electric system in San Mateo?
Yes, you can. We install heat pumps and electric furnaces as well as gas furnaces, and at the estimate we tell you which option fits your home and your budget. Rebates may be available for some electric systems, and your project manager confirms the details by phone.
How long does a furnace installation take?
It depends on the job. A straightforward swap is shorter than one that involves ductwork or venting changes, and we give you a specific timeline at the estimate.
Can you replace a furnace on short notice in San Mateo?
Yes, in many cases. No-heat calls get priority scheduling, and we give you the installation timeline at the estimate.
Get a Free Estimate for Furnace Installation in San Mateo
No trip fee. A licensed technician visits your home, sizes the furnace, and gives you a written scope.
- go@serviceozone.com
- Santa Clara & San Mateo Counties
Serving the Greater Bay Area
* and other cities across Santa Clara and San Mateo counties